Overview
ADT water and temperature sensor — flood and freeze/environmental monitoring.
On ADT systems, this device is a supervised wireless peripheral (SiX on Command, Self-Setup RF on DIY hub, or Z-Wave for automation SKUs) — status appears in the ADT+ or ADT Control app, and faults can block arming depending on mode settings.
At a Glance
| Specification | Details |
|---|---|
| Detection | Water probe and/or temperature threshold |
| Alerts | App notification; monitoring dispatch per plan |
| Placement | Sump, pan, pipe drip locations |
What This Device Does Well
Provides reliable status reporting and user-facing alerts through the ADT+ or ADT Control app when installed and enrolled correctly.
Before You Service or Replace One
- Platform — Command SiX vs Self-Setup sensor family — battery type and reset steps differ.
- Hub/panel online — must show connected in app before diagnosing sensor.
- Range — distant devices may need Range Extender, not a new sensor.
- Tamper — cover fully closed before declaring hardware fault.
- Monitoring mode — Practice/disarmed modes affect whether alarms dispatch.
Official Sources
Use official ADT help.adt.com support articles for reset procedures, battery types, LED patterns, and regional availability — ADT updates app flows frequently.
FAQs
Does Flood & Temperature Sensor DIY work without an ADT panel or hub?
Most ADT sensors, sirens, and keypads require an ADT Command panel or Self-Setup hub. Cameras and doorbells work in the ADT+ or ADT Control app but do not replace alarm controller functions.
Why does device status show Offline?
Usually battery, Z-Wave range, or hub internet — confirm hub or panel online before replacing hardware.
How do I reset and re-add the device?
Follow the factory reset steps in official ADT help.adt.com support for your exact generation — then Add Device in the ADT+ or ADT Control app near the hub.
Will professional monitoring dispatch on this fault?
Burglary dispatch requires ADT professional monitoring, correct arming mode, and cleared device status faults — verify in app settings.
Where is official documentation?
Primary reference: ADT water/temperature sensor guide
How do I test after installation?
Use ADT+ or ADT Control app device status, arm/disarm test (alarm devices), or motion/Live View test (cameras). Complete tests at final mounted location.
Can I mix generations?
Not always — verify Command vs Self-Setup compatibility in help.adt.com before buying replacements.
Does Flood & Temperature Sensor DIY work without an ADT panel or hub?
Most ADT sensors, sirens, and keypads require an ADT Command panel or Self-Setup hub. Cameras and doorbells work in the ADT+ or ADT Control app but do not replace alarm controller functions.
Why does device status show Offline?
Usually battery, Z-Wave range, or hub internet — confirm hub or panel online before replacing hardware.
How do I reset and re-add the device?
Follow the factory reset steps in official ADT help.adt.com support for your exact generation — then Add Device in the ADT+ or ADT Control app near the hub.
Will professional monitoring dispatch on this fault?
Burglary dispatch requires ADT professional monitoring, correct arming mode, and cleared device status faults — verify in app settings.
Where is official documentation?
Primary reference: ADT water/temperature sensor guide
How do I test after installation?
Use ADT+ or ADT Control app device status, arm/disarm test (alarm devices), or motion/Live View test (cameras). Complete tests at final mounted location.
Can I mix generations?
Not always — verify Command vs Self-Setup compatibility in help.adt.com before buying replacements.