Overview
ADT wireless keypad — arming, disarming, and status away from the main panel or hub.
On ADT systems, this device is a supervised wireless peripheral (SiX on Command, Self-Setup RF on DIY hub, or Z-Wave for automation SKUs) — status appears in the ADT+ or ADT Control app, and faults can block arming depending on mode settings.
At a Glance
| Specification | Details |
|---|---|
| Role | Secondary arming interface |
| Functions | Arm/disarm, chime, status |
| Wireless | SiX or Self-Setup link — verify SKU |
What This Device Does Well
Provides reliable status reporting and user-facing alerts through the ADT+ or ADT Control app when installed and enrolled correctly.
Before You Service or Replace One
- Platform — Command SiX vs Self-Setup sensor family — battery type and reset steps differ.
- Hub/panel online — must show connected in app before diagnosing sensor.
- Range — distant devices may need Range Extender, not a new sensor.
- Tamper — cover fully closed before declaring hardware fault.
- Monitoring mode — Practice/disarmed modes affect whether alarms dispatch.
Official Sources
- ADT product page
- https://help.adt.com/article/ADT-Self-Setup-Keypad-Model-Number-SKP3R1-01
- https://help.adt.com/article/Can-I-Get-Additional-Keypads
- https://help.adt.com/article/Can-I-move-my-keypad
- https://help.adt.com/article/Command-Wireless-Keypad
- https://help.adt.com/article/How-Do-I-Change-the-Date-and-Time-on-My-Keypad
- https://help.adt.com/article/How-do-I-reset-my-keypad-after-an-alarm-event
- https://help.adt.com/article/How-do-I-reset-my-keypad-date-and-time
- https://help.adt.com/article/My-Keypad-Does-Not-Work-How-Do-I-Fix-It
- https://www.adt.com/content/dam/adt/downloads/manuals/Brinks1200KeypadManual.pdf
- https://www.adt.com/content/dam/adt/downloads/manuals/Brinks1202and2000KeypadManual.pdf
Use official ADT help.adt.com support articles for reset procedures, battery types, LED patterns, and regional availability — ADT updates app flows frequently.
Compatible Peripherals
This page lists what this product works with in the ADT ecosystem — not generic third-party alarm panels unless explicitly stated in ADT help.adt.com support.
Host compatibility
| Host / ecosystem | How it connects |
|---|---|
| ADT Command panel | Keypad enrollment |
| ADT Self-Setup hub | Keypad via ADT+ app |
Not compatible / common mistakes
Using ADT Z-Wave automation devices without a compatible Command panel or Self-Setup hub.
Replacement guidance
- Match generation and SKU on the product label before ordering.
- After replacement, remove old device from app and add new hardware — Z-Wave IDs do not transfer.
- Document device name and placement in app for end-user support.
- For monitored accounts, run test mode per ADT monitoring plan instructions after swap.
Source: ADT security keypad installation guide (ADT official documentation).