Overview
2GIG LTE or 3G cell radio module — adds cellular alarm reporting and Alarm.com (or dealer ADC / SecureNet / Telus) interactive services to a compatible GC2, GC3, or Edge panel.
Without reliable cellular reporting, remote arm/disarm and central station signals stop when phone lines or broadband fail. Match the exact module SKU to your panel model and dealer platform before truck roll.
At a Glance
| Specification | Details |
|---|---|
| Role | Cellular communicator for interactive services |
| Networks | 4G LTE or legacy 3G — carrier and dealer platform specific |
| Platforms | Alarm.com, ADC, SecureNet, Telus (Canada) — match SKU to account |
| Install | Internal module or approved mounting; antenna routing per manual |
| Supervision | Panel cell trouble; Alarm.com communication tests |
What This Device Does Well
Provides reliable supervised status at the panel and Alarm.com when installed, enrolled, and range-tested correctly.
Before You Service or Replace One
- ICCID and carrier — verify active SIM on correct network.
- Module-to-panel pairing — GC2 vs GC3 vs Edge slot compatibility.
- Antenna path — internal vs ANT5XL external routing.
- Dealer platform — Alarm.com activation tied to specific module SKU.
Official Sources
- 2GIG product page
- 2GIG Full Catalog English
- GC2e User Guide
- 2GIG GC2 User Guide
- 2GIG GC2 User Guide FR
- 2GIG GC2 User Guide PO
- 2GIG GC2 User Guide SP
- 2GIG GC2 User Guide TU
- 10023748a x3 installandprogrammingguide
- 267375589 Rev C 2GIG GC2e SellSheet 0913 WEB 2
Use official 2GIG PDFs and install guides for exact wiring, enrollment, and firmware — specifications vary by SKU and region.
Installation Notes
Follow Cell module install guide; Alarm.com activation checklist and the official resource links in this product folder for mounting, wiring, and enrollment.
Pre-install checklist
- Confirm panel model (GC2/GC3/Edge) and encryption requirements.
- Verify dealer cell account and module SKU before cell install.
- Document installer code and existing zone map for takeover jobs.
- Plan antenna routing (ANT5XL) when panel location has poor cell RSSI.
- Have listed batteries and tools for sensor mounts before enrollment.
Typical install sequence
- Mount and power panel; apply firmware updates per dealer bulletin.
- Install cell module and run communication test / Alarm.com activation.
- Enroll wireless sensors via installer Learn mode; label zones.
- Include Z-Wave devices after excluding from any prior hub.
- Install transceiver/repeater hardware before distant ePlus or fringe sensors.
- Run walk test, user code training, and central station test if monitored.
Cell module install
- Match module to panel model and dealer platform (Alarm.com vs ADC vs SecureNet vs Telus).
- Install antenna before powering module for first time when manual requires it.
- Run communication test and document ICCID for dealer activation.
Power and connectivity reference
| Product type | Power | Network / RF |
|---|---|---|
| GC2/GC3/Edge panel | AC + backup battery | 345 MHz receiver; Z-Wave; optional LTE |
| Wireless sensor | Battery per SKU | 345 MHz; ePlus 900 MHz with XCVR2 |
| Cell module | Panel-powered | LTE to dealer / Alarm.com |
| GC Touch keypad | AC + battery backup | Wireless to panel |
| Z-Wave module | Mains or battery per device | Z-Wave to panel |
Source: Cell module install guide; Alarm.com activation checklist (2GIG official documentation).