Overview
The 2GIG GC2 (and GC2e encrypted variant) is a compact touchscreen wireless panel supervising 345 MHz sensors, Z-Wave devices, and optional LTE communicators for Alarm.com or dealer monitoring platforms.
The panel is the brain of the 2GIG system: it supervises wireless zones, drives local sirens, manages Z-Wave automation, and reports to Alarm.com (or your dealer monitoring platform) when a compatible cell module is installed and activated. Installers program zones, user codes, and dialer options in the installer menu; end users arm/disarm from the touchscreen, keyfobs, or Alarm.com app.
At a Glance
| Specification | Details |
|---|---|
| Role | Compact touchscreen alarm panel |
| Wireless sensors | 345 MHz 2GIG sensors; GC2e supports eSeries encrypted |
| Automation | Z-Wave devices |
| Cellular | GC2 LTE CAT1 modules — verify ADC vs Alarm.com vs SecureNet SKU |
| Programming | Installer code on panel |
| Form factor | Smaller footprint vs GC3 — plan sensor count and range |
What This Panel Does Well
Coordinates intrusion zones, automation, user codes, and central station reporting when cell and monitoring are configured.
Before You Service or Replace One
- Exact panel model — GC2 vs GC3 vs Edge — firmware and modules differ.
- Encryption — GC2e/GC3e/Edge vs standard sensors in the field.
- Cell module SKU — Alarm.com vs ADC vs SecureNet vs Telus.
- Installer code — required for zone changes; document before service.
- Alarm.com dealer — account status, plan, and remote programming access.
Official Sources
- 2GIG product page
- 2GIG Full Catalog English
- 2GIG GC2 User Guide
- 2GIG GC2 User Guide FR
- 2GIG GC2 User Guide PO
- 2GIG GC2 User Guide SP
- 2GIG GC2 User Guide TU
- GC2e User Guide
- 10023748a x3 installandprogrammingguide
- 2GIG Edge Smart Home Manual 1
Use official 2GIG PDFs and install guides for exact wiring, enrollment, and firmware — specifications vary by SKU and region.
Installation Notes
Follow 2GIG GC2/GC2e user guide and install/programming documentation and the official resource links in this product folder for mounting, wiring, and enrollment.
Pre-install checklist
- Confirm panel model (GC2/GC3/Edge) and encryption requirements.
- Verify dealer cell account and module SKU before cell install.
- Document installer code and existing zone map for takeover jobs.
- Plan antenna routing (ANT5XL) when panel location has poor cell RSSI.
- Have listed batteries and tools for sensor mounts before enrollment.
Typical install sequence
- Mount and power panel; apply firmware updates per dealer bulletin.
- Install cell module and run communication test / Alarm.com activation.
- Enroll wireless sensors via installer Learn mode; label zones.
- Include Z-Wave devices after excluding from any prior hub.
- Install transceiver/repeater hardware before distant ePlus or fringe sensors.
- Run walk test, user code training, and central station test if monitored.
Power and connectivity reference
| Product type | Power | Network / RF |
|---|---|---|
| GC2/GC3/Edge panel | AC + backup battery | 345 MHz receiver; Z-Wave; optional LTE |
| Wireless sensor | Battery per SKU | 345 MHz; ePlus 900 MHz with XCVR2 |
| Cell module | Panel-powered | LTE to dealer / Alarm.com |
| GC Touch keypad | AC + battery backup | Wireless to panel |
| Z-Wave module | Mains or battery per device | Z-Wave to panel |
Source: 2GIG GC2/GC2e user guide and install/programming documentation (2GIG official documentation).