On this page
Overview
Ring Retrofit Alarm Kit — converts certain existing wired alarm zones to Ring Alarm Z-Wave reporting through the Base Station.
On Ring Alarm, this device is a supervised Z-Wave peripheral — status appears under Device Health in the Ring app, and faults can block arming depending on mode settings.
At a Glance
| Specification | Details |
|---|---|
| Function | Interface wired legacy zones to Ring Alarm |
| Requires | Compatible wired panel/wiring — verify official compatibility |
| Install | Often professional recommended — map zones carefully |
| Wireless | Z-Wave to Ring Alarm hub |
What This Device Does Well
Provides reliable status reporting and user-facing alerts through the Ring app when installed and enrolled correctly.
Before You Service or Replace One
- Generation — Gen 1 vs Gen 2 vs 3rd gen — battery type and reset steps differ.
- Hub online — Base Station must show connected in app before diagnosing sensor.
- Range — distant devices may need Range Extender, not a new sensor.
- Tamper — cover fully closed before declaring hardware fault.
- Monitoring mode — Practice/disarmed modes affect whether alarms dispatch.
Official Sources
- https://ring.com/support/articles/5ha70/Safety-and-Compliance-Information-for-Retrofit-Alarm-Kit
- https://ring.com/support/articles/9p4y8/Installing-the-Ring-Retrofit-Alarm-Kit
- https://ring.com/support/articles/9z90c/Anatomy-of-a-Wired-Alarm-Panel-Retrofit-Alarm-Kit
- https://ring.com/support/articles/bns9o/Passing-the-Retrofit-Alarm-Kit-Communication-Test
- https://ring.com/support/articles/c2ll2/Wired-alarm-zone-compatibility-with-the-Retrofit-Alarm-Kit
- https://ring.com/support/articles/puv08/installing-ring-retrofit-alarm-kit
- https://ring.com/support/articles/u2098/Ring-Retrofit-Alarm-Kit-FAQs
- https://ring.com/support/products/alarm/retrofit-alarm-kit?page=1
Use official Ring support articles for reset procedures, battery types, LED patterns, and regional availability — Ring updates app flows frequently.
Installation Notes
Follow Ring Retrofit Alarm Kit installation guide and the official support links in this product folder for mounting, power, and enrollment.
Pre-install checklist
- Verify Ring Alarm vs camera/doorbell ecosystem — wrong product category cannot enroll on hub.
- Confirm Ring app on latest version; owner account available for setup.
- Plan device name and room in app for service clarity.
- For monitored locations: verify alarm permit and emergency contact list current.
- Have replacement batteries or transformer spec confirmed before truck roll.
Typical install sequence
- Set up Base Station / Alarm Pro first if this is an alarm Z-Wave device.
- Mount hardware per official template — drill, adhesive, or screw as specified.
- Insert battery / connect power; remove pull tab if present.
- Add Device in Ring app; scan QR or follow in-app prompts.
- Complete placement test (motion, contact gap, outdoor comm test) at final location.
- Arm/disarm test or Live View test; confirm events in app history.
Power and connectivity reference
| Product type | Power | Network |
|---|---|---|
| Alarm hub | AC + backup battery | Wi-Fi and/or Ethernet |
| Z-Wave sensor/siren/keypad | Battery or AC per model | Z-Wave to hub |
| Range Extender | Wall outlet | Z-Wave repeater |
| Camera / doorbell | Battery, plug, wired, PoE | Wi-Fi |
| Chime Pro | Wall outlet | Wi-Fi extender for Ring devices |
Source: Ring Retrofit Alarm Kit installation guide (Ring official documentation).
FAQs
Does Ring Alarm Retrofit Alarm Kit work without Ring Alarm?
Most Ring Alarm sensors, sirens, and keypads require a Ring Alarm Base Station or Alarm Pro. Cameras and doorbells work standalone in the Ring app but do not replace alarm hub functions.
Why does Device Health show Offline?
Usually battery, Z-Wave range, or hub internet — confirm Base Station online before replacing hardware.
How do I reset and re-add the device?
Follow the factory reset steps in official Ring support for your exact generation — then Add Device in the Ring app near the hub.
Will professional monitoring dispatch on this fault?
Burglary dispatch requires Ring Protect Pro, correct arming mode, and cleared Device Health faults — verify in app settings.
Where is official documentation?
- https://ring.com/support/articles/5ha70/Safety-and-Compliance-Information-for-Retrofit-Alarm-Kit
- https://ring.com/support/articles/9p4y8/Installing-the-Ring-Retrofit-Alarm-Kit
- https://ring.com/support/articles/9z90c/Anatomy-of-a-Wired-Alarm-Panel-Retrofit-Alarm-Kit
- https://ring.com/support/articles/bns9o/Passing-the-Retrofit-Alarm-Kit-Communication-Test
- https://ring.com/support/articles/c2ll2/Wired-alarm-zone-compatibility-with-the-Retrofit-Alarm-Kit
- https://ring.com/support/articles/puv08/installing-ring-retrofit-alarm-kit
- https://ring.com/support/articles/u2098/Ring-Retrofit-Alarm-Kit-FAQs
- https://ring.com/support/products/alarm/retrofit-alarm-kit?page=1
Primary reference: Ring Retrofit Alarm Kit installation guide
How do I test after installation?
Use Ring app Device Health, arm/disarm test (alarm devices), or motion/Live View test (cameras). Complete tests at final mounted location.
Can I mix generations?
Not always — verify Gen 1 vs Gen 2 compatibility in Ring support before buying replacements.